skip to main text

Making Copies

This section describes the basic procedure to perform standard copying.

  1. Check that printer is turned on.

  2. Load paper.

  3. Select Copy on the HOME screen.

    The Copy standby screen is displayed.

  4. Load original on platen or in ADF (Auto Document Feeder).

  5. Specify the number of copies using the up down button or the Numeric buttons.

  6. Specify settings as necessary.

    The print setting screen is displayed when you press the OK button.

  7. Press the Black button or the Color button.

    The printer starts copying.

    Remove the original on the platen or from the document output slot after copying is complete.

    Important

    • Do not open the document cover or remove the original from the platen until scanning is completed.

    • If you load the original in the ADF, do not move the original until copying is complete.